PRO-X HUB (IFR EFIS Centric)

Buy Now

PRO-G HUB (IFR GARMIN Centric)

PRO HUB (IFR Centric)

Buy Now

     

The Fast Stack System provides tremendous value and benefits standardizing your panel wiring and avionic interconnections.

• FAA-PMA
• EFIS centric Configuration
• Cost-effective, standardized solution
• Increases safety and reliability over traditional hand-wiring
• Increased life-time performance of avionics with professionally, "ready-built" Milspec Tefzel cables
• Eliminates most of the time consuming, error-prone hand wiring processes used today
• Fast avionic installs and upgrades
• Cables comply with FAA AC43.13-1B/2A and manufacturer specs
• Drastically reduced install labor charges, scope creep, and aircraft downtimes
• Designed for both new and older aircraft—certified or kitplanes
• Entire avionic stack wired in less than 3 hours

The Fast Stack Pro-X Hub is designed for an IFR EFIS centric configured instrument panel and can be retrofitted to any older or newer aircraft, certified or home-built. The Pro-X Hub is compatible with (but not limited to) Garmin NAV/GPS/COM, audio panels, intercoms, moving map displays, VOR indicators, HSI's and just about any "send and receive" Electronic Flight Information System (EFIS).

The Pro-X Hub is compact and lightweight permitting installation anywhere behind the instrument panel. Simply select the appropriate Approach cables for your avionics, plug it in and you are done. All Approach cables are Milspec Tefzel with proper gauge and shielding. Cable ends are terminated with the connector connecting the Pro-X Hub to the avionics.

Approach's Fast Stack eliminates the time consuming, error-prone hand wiring methods used today and simplifies installs and upgrades by reducing the complicated technical details required for panel wiring. Labor charges, panel wiring scope creep and aircraft downtime are drastically reduced. Approach's Fast Stack avoids the problems of hand wiring by minimizing electronic noise and other associated problems by centralizing the grounding and utilizing uniform cable shielding and proper termination providing improved, lifetime avionics performance and a new level of safety.

Approach designed its system for both newer and older aircraft, certified or home-built. Additionally, the wiring clutter typically found behind any instrument panel is finally eliminated. Approach will transform the way you think about avionic installs and upgrades with a simple and reliable solution making it easier than ever before to maintain your aircraft. Call us at 218.237.7825 or visit us on the Web at www.approachfaststack.com

The Fast Stack System provides tremendous value and benefits standardizing your panel wiring and avionic interconnections.

• FAA-PMA
• Cost-effective, standardized solution
• Increases safety and reliability over traditional hand-wiring
• Increased life-time performance of avionics with professionally, "ready-built" Milspec Tefzel cables
• Eliminates most of the time consuming, error-prone hand wiring processes used today
• Fast avionic installs and upgrades
• Cables comply with FAA AC43.13-1B/2A and manufacturer specs
• Drastically reduced install labor charges, scope creep, and aircraft downtimes
• Designed for both new and older aircraft—certified or kitplanes
• Entire avionic stack wired in less than 3 hours

The Fast Stack Pro-G Hub is designed for an IFR configured instrument panel and can be retrofitted to any older or newer aircraft, certified or home-built. The Pro-G Hub is compatible with (but not limited to) Garmin NAV/GPS/COM, audio panels, intercoms, moving map displays, VOR indicators, HSI's and just about any "send and receive" RS-232 formatted electronic device. For more options and compatibilities, the Fast Stack Pro Hub is the solution.

The Pro-G Hub is compact and lightweight permitting installation anywhere behind the instrument panel. Simply select the appropriate Approach cables for your avionics, plug it in and you are done. All Approach cables are Milspec Tefzel with proper gauge and shielding. Cable ends are terminated with the right connector connecting the Pro-G Hub to the avionics.

Approach's Fast Stack eliminates the time consuming, error-prone hand wiring methods used today and simplifies installs and upgrades by reducing the complicated technical details required for panel wiring. Labor charges, panel wiring scope creep and aircraft downtime are drastically reduced. Approach's Fast Stack avoids the problems of hand wiring by minimizing electronic noise and other associated problems by centralizing the grounding and utilizing uniform cable shielding and proper termination providing improved, lifetime avionics performance and a new level of safety.

Approach designed its system for both newer and older aircraft, certified or home-built. Additionally, the wiring clutter typically found behind any instrument panel is finally eliminated. Approach will transform the way you think about avionic installs and upgrades with a simple and reliable solution making it easier than ever before to maintain your aircraft. Call us at 218.237.7825 or visit us on the Web at www.approachfaststack.com

The Fast Stack System provides tremendous value and benefits standardizing your panel wiring and avionic interconnections.

• Fast avionic installs and upgrades
• Cost-effective, standardized solution
• Increased safety and reliability over traditional hand-wiring
• Fast Stack is designed for Garmin, Apollo, Bendix/King stacks and most other avionic equipment.
• Increased life-time performance of avionics with professionally, "ready-built" Milspec Tefzel cables.
• Complete with autopilot interface
• Cables comply with FAA AC43.13-1B/2A and manufacturer specs
• Drastically reduced install labor charges, scope creep, and aircraft downtimes
• Designed for both new and older aircraft—certified or kitplanes
• Entire avionic stack wired in less than 3 hours

The Approach Fast Stack Pro Hub is ideally suited for IFR configured instrument panels and can be retrofitted to any older or newer aircraft, certified or home-built. The Pro Wiring System is compatible with most NAV/GPS/COM, modern audio panels, intercoms, moving map displays, VOR indicators, HSI's, RMI's, ADF's, annunciators, mode control and just about any "send and receive" RS-232 formatted electronic device. The Pro Wiring System is designed for a full Garmin, Apollo, or Bendix/King stack and includes an autopilot interface.

The Pro Hub is compact and lightweight permitting installation anywhere behind the instrument panel. Simply select the appropriate Approach cables for your avionics, plug them in and you are done. All Approach cables are Milspec Tefzel with proper gauge and shielding. Cable ends are terminated with the connector connecting the Approach Pro Hub to the avionics.

Approach's Fast Stack eliminates the time consuming, error-prone hand wiring methods used today and simplifies installs and upgrades by reducing the complicated technical details required for panel wiring. Labor charges, panel wiring scope creep, and aircraft downtime are drastically reduced. Approach' Fast Stack avoids the problems of hand wiring by minimizing electronic noise and other associated problems by centralizing the grounding and utilizing uniform cable shielding and proper termination providing improved, lifetime avionic performance and a new level of safety.

Approach designed its system for both newer and older aircraft, certified or home-built. Additionally, the wiring clutter typically found behind any instrument panel is finally eliminated. Approach will transform the way you think about avionic installs and upgrades with a simple and reliable solution making it easier than ever before to maintain your aircraft. Call us at 218.237.7825 or visit us on the Web at www.approachfaststack.com.

©2012 Approach Fast Stack. All Rights Reserved. 1609 Industrial Ave W, Park Rapids, MN 56470 USA • Phone: 1-218-237-STAK (7825) • Fax: 1-218-237-4426